• Home
• About us
• Products
  • Hot Insulation
  • Cold Insulation
  • Others
• Calculation
  • Calculation Program
  • Conversion Table
• Contact us
• Map
• Job Opportunity

ตารางแสดงคุณสมบัติ

Dimension

Characteristics	Wired mats	Blanket	Slab	Pipe
Nominal Density (kg/m³ )	80, 100	40, 50, 60, 80, 100	40, 50, 60, 80, 100, 120	120
Size (Width x Length x Thickness )	0.6 m  x 8 m x 25 mm  0.6 m  x 6 m x 40 mm  0.6 m  x 5 m x 50 mm  0.6 m  x 4 m x 75 mm   0.6 m x 4 m x 100 mm		0.6 m x 1.2 m x 25 mm 0.6 m x 1.2 m x 40 mm 0.6 m x 1.2 m x 50 mm 0.6 m x 1.2 m x 75 mm 0.6 m x 1.2 m x 100 mm	Pipe O.D. : 22 to 711mm Thickness(mm ) : 25, 30, 40, 50, 60, 65, 70, 75, 80, 90, 100 Length (mm) : 1000
Facing	PLAIN OR ALUMINIUM FOIL ONE SIDE AND BOTH SIDE FACING

Technical Parameters

  Wired mats

Maximum Service Temp.		750 º C							ASTM C411
Thermal Conductivity (W/mK)
Mean Temperature		50 º C	100 º C	150 º C	200 º C	250 º C	300 º C	350 º C	ASTM C177
Wired mats 159		0.040	0.044	0.051	0.059	0.069	0.082	0.097
Wired mats 164		0.040	0.045	0.053	0.063	0.075	0.089	0.106
Noise Reduction Coefficient (NRC)
Type	Thickness (mm)	Frequency							ISO 354
		125 Hz	250 Hz	500 Hz	1000 Hz	2000 Hz	4000 Hz		Roxul Wired Mats are highly efficient sound absorbing insulation products, due to the open fibre structure
Wired mats 159	50	0.31	0.82	1.08	1.10	1.08	1.06
	100	0.96	0.93	0.99	1.03	1.03	1.11
Wired mats 164	50	0.37	0.96	1.18	1.10	1.09	1.08
	100	0.98	1.18	1.08	1.09	1.08	1.11
Fire Performance		Non-combustible							BS 476: Part 4
Water Absorption		Less than 1%							BS : 2972 : 1989
Moisture Resistance		Absorb less than 0.02 Vol%							ASTM C1104/ 1104M
Chloride Content		Less than 6 ppm							ASTM C871
Suitability for use		Tested are approved in accordance to SIRIM and PSB. Roxul Wired Mats comply with the requirement of BS 3958 : Part 3 "Metal mesh faced mats and mattresses" and can be used to satisfy BS 5422 "Themal insulating materials on pipe, ductwork and equipment". The Wired Mats conforms toASTM C592 Type II, "Standard Specification for Mineral Fiber Blanket Insulation and Blanket -Type Pipe Insulation (Metal - Mesh Covered) (Industrial type)". Roxul Wired Mats meet the requirements for use over stainless steel in accordance with ASTM C795

  Blanket

Maximum Service Temp.	750 º C
Product Type	MPB 100	MPB 200	MPB 300	MPB 400	MPB 500	Standards
Nominal Density (kg/m³)	40	50	60	80	100
Thermal Conductivity, K Value at 20 º C (W/mK)	0.036	0.035	0.034	0.033	0.033	ASTM C177/ BS 874
Fire Performance	Non-combustible					BS 476 Part 4
Fire Hazard Indices	Spread of Flame (0-10) = 0 Smoke Developed (0-10) = 0					BS 476 Part 6 & 7
Moisture resistance	Absorb less than 0.02 Vol%					ASTM C1104/1104M
Water Absorption (short term partial immersion)	< 1kg/m ²					EN 1609
	< 1% change in weight					BS 2972 : 1989
Suitability for use	Tested and approved in accordance to SIRIM and PSB. Roxul MPB conforms to ASTM C553 " Specifications for Mineral Fiber Blanket Thermal Insulation for Commercial and IndustrialvApplications"

  Slab

Maximum Service Temp.	750 º C
Product Type	MPS 100	MPS 200	MPS 300	MPS 400	MPS 500	MPS 620	Standards
Nominal Density (kg/m³)	40	50	60	80	100	120
Thermal Conductivity, K Value at 20 º C (W/mK)	0.036	0.035	0.034	0.033	0.033	0.033	ASTM C177/ BS 874
Fire Performance	Non-combustible						BS 476 Part 4
Moisture resistance	Absorb less than 0.02 Vol%						ASTM C1104/1104M
Water Absorption	< 1%						BS 2972 : 75
Suitability for use	Tested and approved in accordance to SIRIM and PSB. Roxul MPS conforms to BS 3958 : Part 5 "Specification for bonded man-made mineral fiber slabs" and can be used to satisfy BS 5422 " Themal insulating materials on pipe, ductwork and equipment". Roxul MPS conforms to ASTM C612 "Standard Specification for Mineral Fibre Block and Board Thermal Insulation"

 

<<< Back